Understøtter til æbletræer
Indhold:
Med ankomsten af august kommer hældningen af æblefrugter. Og det sker sådan, at under vægten af de modne frugter læner æbletræets grene sig lavere og lavere mod jorden. Hvilket kan føre til revner og bryde dem. For at undgå dette er det nødvendigt straks at hjælpe planten med at bevare og bevare grene og stammer uden at miste afgrøden. Det vigtigste er at tage sig af grenens sikkerhed i tide, indtil frugterne bøjer grenene endnu mere og bryder dem. Det er i dette øjeblik, at understøtningerne til æbletræerne hurtigt installeres, i dette tilfælde for grenene. De bruger forskellige planker, almindelige stænger, pinde, pæle og endda metal- og plastrør. Næsten alt går i gang. I denne artikel vil vi fortælle dig, hvordan du korrekt laver rekvisitter under et æbletræ. Og hvad der vil være bedre for din have - vælg efter dig.
Rekvisitter til æbletræer gør det selv
Understøtter æbletræer med egne hænder: foto
Den allerførste og vigtigste regel ved installation af understøttelse er under ingen omstændigheder at bruge uprøvede stænger og poler til styrke. Det er bedre at bruge noget metallisk, så det ikke sker, at når støtten, du lavede, er brudt, bryder hele grenen af æbletræet fra stammen ikke.
Teleskopstøtter til æbletræer
For at lave en sådan støtte til et æbletræ er det nødvendigt at forberede metal-plast eller plast vandrør på forhånd. Desuden en sådan diameter, at det ene rør frit kunne komme ind i det andet. Når du har lagt dem i, skal du bore huller i to rør på samme tid med en omtrentlig diameter på 0,5-1 centimeter, afhængigt af rørstørrelsen. Dette gøres for at gøre det lettere at foretage højdejusteringer, hvis det er nødvendigt.
Understøttelse af æbletræsgrene lavet af glasfiberforstærkning. Efter at den højde, du har brug for, allerede er foretaget, indsættes bolte med møtrikker med den nødvendige diameter i disse huller, og strammes i overensstemmelse hermed. Efter at have erhvervet plastfragmenter i form af planker, skal du opvarme dem og bøje dem, så der opnås separate dele, der ligner bogstavet C. Derefter, ved enden af tynde rør, fikseres dem flade og vedhæftes blødt materiale, for eksempelvis termisk isolering på indersiden. Alt dette for at indsamle og erstatte under et træs grene.
En anden måde er at lave en rørmontering. Duralumin -rør i form af redningsdukker. Den mindre ender med kroge i den ene ende, og den anden ende placeres i et større rør. For at opnå rør med den nødvendige længde skubbes de fra hinanden, skrues af og fastgøres. For at gøre dette bores huller på forhånd med samme afstand, hvor bolte eller låsekiler derefter indsættes.
Små rør skal være en halv tomme i diameter, og store bør være omkring tre fjerdedele eller en tomme. Krogens konfiguration hjælper ikke kun med at bøje eller bøje trægrene, men også til at indsamle møl larvereder fra dem og også til at fjerne tørrede frugter. Til disse kroge bruges ståltråd med en tykkelse på cirka en centimeter, ikke mere.
Sådan laver du støtter under et æbletræ ved hjælp af paraply chatalovka -metoden
Der er en måde at lette lidelsen for overbelastede grene. Du skal binde grenene til et enkelt defineret støtterør eller stolpe, der tidligere var begravet ved siden af træstammen. Fra denne søjle vil de såkaldte trådtråde afgå, som er fastgjort gennem ringe eller sløjfer til grene til træets grene.
Til dette er separate elementer af gamle dæk egnede, hvor grene placeres. Også til installationen af en sådan fastholdelsesanordning skal der være en have -trappestige. Hovedstativet til denne understøtning er lavet lidt højere end æbletræet, der skal bindes, med cirka 30-40 centimeter, og støttetråde lavet af tråd eller plast er fastgjort direkte på det. Derefter bindes grenene gennem gummi, eller noget lignende dem, ringer til deres ende.
Men det sker, at et sådant problem opstår - stammen på æbletræet er skæv, eller selve træet er meget lavt. I dette tilfælde graves et jernrør eller en plastpæl ved siden af træstammen. Men det er ret stærkt og stærkt, med en længde, der er omtrent lig med selve æbletræet, godt eller lidt højere. I den høje ende af et sådant rør eller en pol er en speciel cirkel lavet af temmelig stærk ståltråd. Den anden ende af røret graves dybere ned i jorden. Ved hjælp af reb eller stykker blød tråd bindes grene af et træ med bløde foringer til den øvre ring.
Der kræves mindst to personer for at installere understøtningsstrukturen under æbletræet for at sikre balance og ensartethed af belastningen. Som bløde puder til grene, for ikke at komme til at beskadige dem ved et uheld, bør du bruge: gummiband, separate dele af den gamle haveslange, gamle dækrør, dæk fra knallerter og også elastomer.
De skæres på tværs af ringen i separate stykker på cirka 10 centimeter, og derefter laves der to huller i hver sådan foring i fremtiden. Yderligere påføres dette fragment på skuddet nedenunder, og hullerne skal være ovenpå. Du skal tråde en tråd ind i disse huller eller en ledning fra vores jernrør og binde den i en knude.
Fordelen ved denne enhed er, at den vil betjene dig hele året; den bør ikke fjernes og sættes væk om vinteren. Designet vil beskytte grenene ikke kun mod frugtens sværhedsgrad, men også mod stærk vindstød og rigeligt snedække om vinteren.
Understøtter under æbletræet: står med et spyd
Det mest måske mest enkle og mest elementære middel til at understøtte vægtede grene af et æbletræ er de såkaldte hornede grene fra skoven. Vil fungere som et fremragende naturligt stativ til æblegrene. Men for at det ikke ved et uheld ødelægger barklaget på træet, skal der klippes forudskårne gummirør langs denne rogueline.
Disse rør kan fås fra f.eks. Et gummidæk eller en gammel beskadiget kunstvandingsslange. Du kan også gøre dette: fastgør et stykke træ med et bræt. Dernæst placeres planken på jorden, og en vægtet gren af et æbletræ placeres på rogulin med bogstavet U. Efter rogulinen sættes den fast med to selvskærende skruer i denne fortykkede plade, men så enden af rogulin ikke går i jorden.
Takket være denne metode er understøtningerne til grenene præcis den længde, der er nødvendig. Et spyd ville være godt til at passe dele af slangen med den nødvendige diameter, eller bare pakke det ind med gummi. Efter høst skal træstøtterne fjernes under taget eller i et staldtype rum. De kan jo komme godt med igen næste år, så de skal gemmes.
Der er ét råd fra erfarne gartnere. For ikke at overbelaste grenene med frugt, skal du fjerne en lille del af æggestokkene med kraftig rystning.
Metalunderstøtninger til æbletræer
Det er nødvendigt at meget omhyggeligt undersøge grene af modne træer. Og mest af alt i det øjeblik, hvor disse grene er fuldstændigt overbelastede med modne frugter. I øjeblikket er et presserende behov for at bygge en støtte til æbletræets grene.
Dette kan være at binde grenene til understøtningerne, støtte understøtningerne under trægrenene, forbinde grenene med hinanden og med stammen. De stærkeste og mest holdbare er metalunderstøtninger. De kan laves i hånden ved hjælp af metalrør af enhver diameter.
Den eneste ulempe er, at det vil koste mere i sum, og det vil se mere massivt ud. For på en eller anden måde at reducere omkostningerne kan du bruge brugte rør.Og når du bruger aluminium som bund, kan du også reducere vægten af understøtningen. Det vigtigste er at kende længden af sikkerhedskopierne.
Lad os overveje, hvordan man korrekt laver sådanne rekvisitter under grene af æbletræer. Først og fremmest skal du save rørene af omkring den halve længde, du har brug for. Dernæst borer vi et par huller. Vi sætter røret med den mindste diameter med en gaffel fastgjort til toppen i den højde, vi har brug for.
Derefter kombinerer vi hullerne og styrker dem yderligere med et temmelig tykt søm, der er trådt igennem og igennem. Sådan viser denne support sig. Vi anbefaler, at du i første omgang udskifter støtterne under de øvre grene og derefter kun under de nederste af de træer, der først begynder at bære frugt (om sommeren). Og så under de senere sorter af æbletræer. Dette råd er endnu mere velegnet til de plantager, der vokser i højt ventilerede områder.
Stige som støtte
En anden form for understøtningsstruktur er en sådan installation, der ligner meget en reol eller trinstige. Det gøres på denne måde. På begge sider af træstammen, i en afstand af cirka 50 centimeter, er der sat to pinde i form af bogstavet J. Desuden skal stængernes nedre ender være lige og uddybe cirka 12 centimeter. Mens de er fastgjort mellem hinanden med separate små pinde, på grund af hvilke der opnås en trappe.
Overbelastede trægrene er fastgjort til pinde, hvor de understøttes af tråd eller blød tråd. Hvis et træs grene vokser ens i hele kronen, er det ikke nødvendigt at vedhæfte denne struktur til stammen. Da grene af æbletræet placeret i forskellige retninger fungerer som vægte, takket være at hele enheden bliver tilstrækkelig stabil.
Nogle gartnere ændrer dette design lidt og sætter ikke to, men tre eller endda fire hovedpoler. Dette design viser sig ikke kun at være ganske hårdfør, men også behageligt nok til en lille have. Og hvis du også gør krydspindene stærke, så vil enheden faktisk blive til en stige, ved hjælp af hvilken du derefter let kan høste.
Hvordan man præcist skal støtte træerne er op til gartneren selv. Men det ville være mere logisk og lettere at sætte en støtte mere holdbar og hårdfør, som kan vare i flere år uden at komme ud om vinteren. Alt dette i tilfælde af at æbletræer vokser i din have med meget store, stabile og gode frugter.
Ved dyrkning af æblesorter med et lille og temmelig uregelmæssigt udbytte. Også for unge æbletræer vil det være bedre at bruge midlertidige rekvisitter. Så det er muligt hurtigt at udskifte en støtte under grenen, når det er nødvendigt, og når det ikke er nødvendigt at fjerne den.
Sådan laver du T-formede understøtninger til grene af æbletræer
En sådan støtte kommer ud på grund af forbindelsen mellem to pinde i form af bogstavet T. I det tilfælde, hvor trægrenene også er store med en stor høst, kan denne støtte også rettes ved at sømme to pinde mere fra begge sider i en vinkel. Fra den ene ende af pinden til den rene stang. Derefter bringes denne støtte under grenen. Men kun ved at placere strukturen på en sådan måde, at dens hovedbelastning falder på denne understøtning. På samme tid indsættes en vinkelret pind i et hul, der er cirka 15 centimeter dybt og indpodet.
Sæt om nødvendigt flere rekvisitter.
Meget stærke og pålidelige træstøtter er firkantede pyramider... Med deres hjælp er det muligt at aflæse tunge grene i absolut enhver højde. For at lave en sådan pyramide skal to par trapezoider placeres over for hinanden. Desuden gøres mellemrummet mellem selve rammen det samme nøjagtigt som mellemrummet mellem de nederste ender af rammestiverne.
Takket være denne metode er resultatet en struktur i form af en firkantet pyramide. Rammernes øverste ender vippes og holdes derefter sammen. Derefter placeres vægtede trægrene på dem.
Her er endnu en mulighed for støtte til æbletræer.Vælg en temmelig stærk og tyk stang. Det renses for bark og fastgøres til bagagerummet, mens det uddybes med 18-20 centimeter, cirka. Derefter tages enden af et ret tykt naturligt reb eller et tyndt reb, mens det fastgøres øverst på denne stang. Den anden ende af rebet eller rebet er viklet omkring den ønskede gren af træet, hvilket gør en knude til en holder. Dette design kan hjælpe med at lindre lidelsen fra omkring 6 grene.
Sådan laver du støtter til et æbletræ i form af styrkende grene fra splittelser
Hovedårsagerne til spaltningen af æbletræets grene anses for at være et højt og temmelig rigeligt udbytte, temmelig kraftig vindstød og en stor mængde nedbør om vinteren. Og dette har en meget negativ effekt på æbletræet. Og, hvilket er meget vigtigt, til niveauet for den nuværende og fremtidige høst. For at forhindre spaltning af æbletræets grene vil du blive hjulpet af ret enkle tips til, hvordan du løfter grenene, skrevet nedenfor.
Split beskyttelsesringe
Den vigtigste og vigtigste opgave for enhver gartner i slutningen af sommeren er at hjælpe træet med at holde en stor mængde høst på grenene. Ellers kan det ske, at æbletræets grene kan bryde af under en tilstrækkelig stor vægt fra rigelige frugter såvel som meget kraftige vindstød. Men værst af alt kan stammen af et træ splitte.
For at hjælpe gartneren med at beskytte mod splittelse af grene og stamme vil beskyttelsesringe komme til undsætning. De skal være lavet af et ret robust jernbånd, der strammes med en bolt. Sæt beskyttelsesringe på i midten af kronen. Gør dette, selv før knoppen bryder, om foråret.
For ikke ved et uheld at beskadige æbletræets bark på steder, hvor det berører rammen, skal jernet pakkes ind med en simpel elastisk snor, godt eller med enkle klude. Selve ringen er fastgjort med små gauge stålkroge. Du kan male denne struktur med oliemaling. Så vil det se meget pænere udad.
En god måde at undgå splittelse er at binde træets lemmer og grene med tyk tråd og selvskærende skruer. Selvskærende skruer skrues med ringe fastgjort til dem i stilken og i trægrenene udefra, samtidig med at de holder en centimeter til hætten. Yderligere føres denne ståltråd gennem ringene, og trægreningen fastgøres.
Sådan løftes et faldet æbletræ
Efter et dårligt vejr faldt et æbletræ i din have. Hvad skal man gøre? Inden du foretager dig noget, skal du først finde svarene på nogle spørgsmål.
- Hvor gammelt er træet?
- Hvor opstod bruddet i træstammen?
- Hvad skete der med stammen: er den flækket, er den helt brudt, eller klistrer den stadig fast i træet?
- Hvor lang tid er der gået siden hændelsen fandt sted?
- Hvor tæt er æbletræet, hvormed dette skete?
- Er det muligt at efterlade æbletræet i denne tilstand, indtil høsten er fuldt moden?
Vi svarer:
Hvis dette skete med et tilstrækkeligt ungt træ, og skrotet ikke skete helt, er der mulighed for at bevare frugt på det. Selvom det stadig ville være bedre at forsøge at styrke træet og samle frugterne selv. Ellers er der en chance for plantedød.
Hvis æbletræet sammen med rødderne blev vendt ud af jorden, og dette skete for bare et par timer siden, skal du straks hæve træet til maksimum fra den tidligere højde og understøtte det med understøtninger. Med integriteten af stilken og stilken af plantens rod bør en flok tilstrækkeligt næringsrig og løs jord kastes over et stort rodfæstet sted. Desuden for at gøre dette, så jorden fuldstændigt dækker alle de trukkede rødder.
Efter disse handlinger skal du beskytte denne bakke med skjolde, så den ikke skylles væk af kraftig regn. Vand det regelmæssigt med gødning beregnet til kimplanter. Dette gøres, så plantens rødder modtager let fordøjelig ernæring. Hvis du endvidere ser en intensiv vækst af æbletræet, kan du forlade træet sådan.Lad det vokse i denne position, bare æbletræet får en skrå krone eller vil selv tage et vandret udseende. I tilfælde af en flage på 2/3 af bagagerummets diameter, eller hvis flagen skete for noget tid siden, kan afgrøden ikke gemmes og kombineres. Alle handlinger vil være meningsløse.
Her vil det kun være korrekt at fjerne den afskårne del af anlægget. Dæk alle sår med rødt bly på naturlig linolie og pas på, og prøv at genoplive de resterende grene. I dette tilfælde høstes frugterne nødvendigvis, alt uden undtagelse.
Understøtter dværg- og søjletæbletræer: kant eller espalier og ring
Den bedste hjælper til at bevare høsten af dværgæbletræer og æbletræsøjler er at binde dem på en espalier. Denne metode vil ophæve mange problemer, såsom: en meget fortykket krone af planten, brud og spaltning af skud, lav tolerance over for vinternedbør samt temmelig kraftige regn og vind om sommeren.
Og denne metode vil også øge udbyttet samt øge frugtens kvalitet og smag. Trellis skal være lavet af tyk tråd, som er fastgjort langs linjekanterne på poler eller en speciel enhed lavet af trådstang. Grener og grene af æbletræet er bundet til espalieret med naturligt garn, plastklemmer eller vaskeklud.
En vidunderlig støtte til spredning og små æbletræer er en cykelhjulbøjle lavet af forskellige stiklinger af rør, som er fastgjort på 3-4 pinde under æbletræets krone. Og for at blødgøre barken af æblekviste bruges et skumgummibånd, som vikles rundt om kanten og fastgøres med simpelt elektrisk tape.
Med en stærk vækst af træet er du nødt til at slå en strimmelrandring ned fra tykt jern, hvor der er fem eger. Det forstærkes på 4 stolper lavet af stykker rør. Denne installation skal males med oliemaling, før grene bindes til den. Og pakk det derefter ind med måtter eller et tykt lag gammelt agrofibre. Dette er for at skabe et blødt lag, der ikke skader barken ved friktion. Og det vil heller ikke lade jernet brænde barken om sommeren, som når det opvarmes, og når det fryses om vinteren.
Buestøtte til grene
Det sker ofte, at æbletræer producerer et så højt frugtudbytte, at træets grene simpelthen begynder at bryde fra en sådan tyngde. For at forhindre dette problem tilpasser gartnere særlige buestøtter i kronen.
Til dette skæres tykt gummi i stykker fra et transportbånd eller som ekstraudstyr traktordæk. De er fastgjort på æbletræets grene, og buer af tykt stål eller rustfri tråd indsættes mellem dem. Det viser sig sådan en interessant kokon af trægrene.
Ved små grene kan du påføre gummi fra cykelrøret. Beskyttelsesmaterialet kan skæres med en hacksav eller hakkes med en økse. Og for at slå huller i gummiet, skal du bruge et spidset skifersøm. Disse buer kan placeres i en position fra 35 til 55 grader fra flyet.
Husk, at du under ingen omstændigheder kun skal understøtte kanterne på trægrenene eller kun bunden af grenene. Løft ikke grenene særlig kraftigt, og prøv ikke at forstyrre deres startposition.
Konklusion
Tilstrækkeligt højt udbytte, stærk vindstød, fald af en stor mængde våd sne under frost er ofte hovedårsagen til at bryde og splitte grene i frugttræer. Og dette har en meget negativ effekt på selve æbletræet og på kvaliteten og mængden af høsten i nutiden og fremtiden. Og kun korrekt placerede understøtninger til æbletræer hjælper med at bevare og beskytte grenene på planten og træet som helhed.